Electric Unicycle
Power-Pads
EPDM - foam
EPDM - foam
Handmade from EPDM foam and custom made to your specific needs.
No more unpleasant pressure or abrasion points.
Easy acceleration and braking due to the extreme grip of the material.
Due to the small width, the maximum freedom of movement for the legs is ensured.
Water- and UV-resistant.
The cutout size is freely selectable and design changes are also possible.
Special shapes and sizes are also possible, but limited to a total size of 300 x 100 x 40 mm.
All Power Pads are supplied with special 3M double sided tape and ready to mount.
If you prefer Velcro, any cheap Velcro can be used and applied directly to the already attached double sided tape.
Power-Pads are not only for performance-oriented riders who want to get the maximum performance out of the wheel. Of course, they are primarily intended for stronger acceleration and braking, but they greatly minimize the risk of falling forward from the wheel in certain situations. I'm not talking about wild off-roading, but also in normal road traffic where we have to deal with potholes and other road damage.
In combination with my Jump-Blocks the fun and safety factor can be increased significantly. More about this on the next page!
thickness 30 mm or 40 mm
Price:
square / slanted version 70,00 € *
rounded / slanted version 100,00 € *
Options:
+ 10,00 € hook & loop tape, 2pcs 300x100 mm
(In addition to the double sided tape for self-assembly)
thickness 30mm
Price:
square version 70,00 € *
rounded version 100,00 € *
Options:
+ 10,00 € hook & loop tape, 2pcs 300x100 mm
(In addition to the double sided tape for self-assembly)
thickness 30mm
Price:
square version 70,00 € *
rounded version 100,00 € *
Options:
+ 20,00 € for 10mm thick extension
+ 8,00 € hook & loop tape, 2pcs 250x100 mm
(In addition to the double sided tape for self-assembly)
thickness 30mm or 40mm
Price:
square version 70,00 € *
rounded version 100,00 € *
rounded/slanted version 120,00 € *
Options:
+ 20,00 € for 10mm thick extension
+ 10,00 € hook & loop tape, 2pcs 350x100 mm
(In addition to the double sided tape for self-assembly)
thickness 30mm or 40mm
Price:
square version 70,00 € *
rounded version 100,00 € *
rounded/slanted version 120,00 € *
Options:
+ 20,00 € for 10mm thick extension
+ 10,00 € hook & loop tape, 2pcs 350x100 mm
(In addition to the double sided tape for self-assembly)
thickness 30mm or 40mm
Price:
square version 70,00 € *
rounded version 100,00 € *
rounded/slanted version 120,00 € *
Options:
+ 20,00 € for 10mm thick extension
+ 10,00 € hook & loop tape, 2pcs 350x100 mm
(In addition to the double sided tape for self-assembly)
thickness 30mm or 40mm
Price:
square version 70,00 € *
rounded version 100,00 € *
Options:
+ 20,00 € for 10mm thick extension
+ 10,00 € hook & loop tape, 2pcs 350x100 mm
(In addition to the double sided tape for self-assembly)
thickness 30mm or 40mm
perfect fit for NyloNove side plates
Design customization for other fairing kits possible
Price:
square version 70,00 € *
rounded version 100,00 € *
rounded/slanted version 120,00 € *
Options:
+ 20,00 € for 10mm thick extension
+ 10,00 € hook & loop tape, 2pcs 350x100 mm
(In addition to the double sided tape for self-assembly)
thickness 30mm or 40mm
Price:
square version 70,00 € *
rounded version 100,00 € *
rounded/slanted version 120,00 € *
Options:
+ 20,00 € for 10mm thick extension
+ 10,00 € hook & loop tape, 2pcs 350x100 mm
(In addition to the double sided tape for self-assembly)
thickness 30mm or 40mm
Price:
square version 70,00 € *
rounded version 100,00 € *
rounded/slanted version 120,00 € *
Options:
+ 20,00 € for 10mm thick extension
+ 10,00 € hook & loop tape, 2pcs 350x100 mm
(In addition to the double sided tape for self-assembly)
thickness 30mm or 40mm
Price:
square version 70,00 € *
rounded version 100,00 € *
rounded/slanted version 120,00 € *
Options:
+ 20,00 € for 10mm thick extension
+ 10,00 € hook & loop tape, 2pcs 350x100 mm
(In addition to the double sided tape for self-assembly)
Unique Seat & Power-Pad Combo only for Kids
the Power-Pads are supplied with double-sided adhesive tape
the seat holds perfectly with Velcro on the wheel
Price: 50,00 € *
thickness 30mm or 40mm
two Versions available (see pictures)
Attention! Due to the very curved shape of the V12, the Power-Pad Version 2 can not be fully glued to the original V12 pad. Velcro is mandatory here! Since it apparently does not bother everyone like me, I offer it now anyway. I recommend rather to take the Version 1, even if it covers the LEDs and corresponds less to the shape of the original pads. It can be mounted at this lower position better with Velcro.
Price:
Version 1 - square version 70,00 € *
Version 1 - rounded version 100,00 € *
Version 2 - square version 80,00 € *
Version 2 - rounded version 110,00 € *
Options:
+ 20,00 € for 10mm thick extension
+ 10,00 € hook & loop tape, 2pcs 350x100 mm
(In addition to the double sided tape for self-assembly)
thickness 30mm or 40mm
Price for older 16X version:
square version 60,00 € *
rounded version 90,00 € *
Price for newer 16X version:
square version 70,00 € *
rounded version 100,00 € *
including pre-installed Velcro on the front/rear to balance the height and in the middle only double sided tape (see last picture)
See last few pictures to determine if you need the old or new version.
thickness 30mm or 40mm
Price:
square version 70,00 € *
rounded version 100,00 € *
rounded/slanted version 120,00 € *
thickness 30mm or 40mm
include left + right battery case extension
include 3M double sided tape (pads + extension)
The extensions are attached to the existing holes with the original screws and double-sided tape. The original extensions are not stable enough for my Power-Pads!
Price:
square version 95,00 € *
rounded version 125,00 € *
rounded/slanted version 145,00 € *
only left + right battery case extension 25,00 € *
Options:
+ 10,00 € hook & loop tape, 2pcs 350x100 mm
(In addition to the double sided tape for self-assembly)
+ full size side plates for Power-Pad installation here
thickness 30mm or 40mm
Price:
square version 70,00 € *
rounded version 100,00 € *
rounded/slanted version 120,00 € *
Options:
+ 10,00 € levelling plates for Sherman / Sherman Max
+ 20,00 € for 10mm thick extension
+ 10,00 € hook & loop tape, 2pcs 350x100 mm
(In addition to the double sided tape for self-assembly)